Author Topic: Thick Flange Barrels!  (Read 2129 times)

Offline LJ.

  • Peterborough UK.
  • Wise & Enlightened
  • *
  • Join Date: Jun 2006
  • Posts: 1403
  • Karma: 15
  • The Red A10!
    • LJ's Website!
Thick Flange Barrels!
« on: 09.11. 2006 20:57 »

I have come across news that SRM has had made a batch of Thick Flange Barrels this last Summer. Anyone know how many they had made and what the costs were/are? Always useful to have for a later date.
Ride Safely Lads! LJ.
**********************
1940 BSA M20 500cc Girder/Rigid- (SOLD)
1947 BSA M21 600cc Girder/Rigid-Green
1949 BSA A7   500cc Girder/Plunger Star Twin-(SOLD)
1953 BSA B33  500cc Teles/Plunger-Maroon
1961 BSA A10  650cc Golden Flash-Blue
1961 BSA A10  650cc Golden Flash-Red

Offline terryk

  • Valued Contributor
  • ****
  • Join Date: Oct 2006
  • Posts: 460
  • Karma: 3
  • Townsville Queensland Australia
Re: Thick Flange Barrels!
« Reply #1 on: 08.04. 2007 14:45 »
I have a couple of these barrels. I'm after bottom end plunger motor stuff. Also I am chasing a front wheel or hub for 1951 plunger bsa a10, it is half width hub type. They are 8 inch brake and have six large bubbles on back of brake drum when you look from primary side of bike. Also they are not the ones will extra small knock outs and without the extra ribs on edge of brake drum like gold star. Plunger b33/31 is the same. thanks terrykennedy11@bigpond.com.au
1950-53 A10 rigid/plungers, 1958-61 A10 super rockets, 1947-50 A7 longstrokes, 1949 Star twin,
1951-54 A7 plungers, 1940s M21, WDM20s,
1948-50s B33s rigid/plunger/swingarm, 1948-50s b31s rigid/plunger/swingarm