Author Topic: RGS control levers  (Read 159 times)

Offline Sunbeam

  • A's Good Friend
  • ***
  • Join Date: Jun 2011
  • Posts: 86
  • Karma: 0
RGS control levers
« on: 05.12. 2024 17:50 »
I have a 62 RGS which I'm converting to touring trim (upsidedown standard bar). Would anyone know if BSA fitted combined air / mag levers or were they separate. Also, were cable adjusters on the brake / clutch levers.....many thanks.

Howard.
Howard

Online trevinoz

  • Newcastle, N.S.W. Australia.
  • Wise & Enlightened
  • *
  • Join Date: Jul 2006
  • Posts: 3238
  • Karma: 71
Re: RGS control levers
« Reply #1 on: 05.12. 2024 20:37 »
Combined levers with adjusters. The adjusters have a small knurled nut.

Offline Sunbeam

  • A's Good Friend
  • ***
  • Join Date: Jun 2011
  • Posts: 86
  • Karma: 0
Re: RGS control levers
« Reply #2 on: 06.12. 2024 14:24 »
Thank you Trev. Can you recommend any supplier?. The pivot centres were 7/8 inch on my clip ons, very easy to operate. All the levers I'm coming across are bigger than this ...1 -1/16 inch. I could use the ball end levers off my clip ons as they are 7/8 centres but cant find any adjustable Amal lever perchs (mounts)....many thanks.

Howard.
Howard

Online limeyrob

  • Wise & Enlightened
  • *
  • Join Date: Nov 2023
  • Posts: 1038
  • Karma: 4
Re: RGS control levers
« Reply #3 on: 06.12. 2024 16:41 »
Have you looked at the ally Amal copies?  May or may not be correct but they do look to be rather nice levers.
Slough 59 GF/SR