Author Topic: Ignition timing in degrees  (Read 717 times)

Online muskrat

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Jul 2009
  • Posts: 10977
  • Karma: 131
  • Lithgow NSW Oz
    • Shoalhaven Classic Motorcycle Club Inc
Re: Ignition timing in degrees
« Reply #15 on: 09.08. 2024 18:55 »
G'day Fellas.
I'll throw my two bob's worth in.
As Rob say's about higher compression the flame is faster so less advance is needed (31-32 BTDC). Then if using higher octane fuel the flame is slower so more advance is needed (34-35 BTDC).
It's all a bit "suck & see" as each motor/owner is different (combinations of above and riding style). I just keep advancing the timing till it pings then back it off a degree or two.
Cheers
'51 A7 plunger, '57 A7SS racer now a A10CR, '78 XT500, '83 CB1100F, 88 HD FXST, 2000 CBR929RR ex Honda Australia Superbike .
Australia
Muskys Plunger A7

Online limeyrob

  • Resident Legend
  • *****
  • Join Date: Nov 2023
  • Posts: 779
  • Karma: 4
Re: Ignition timing in degrees
« Reply #16 on: 09.08. 2024 19:44 »
I was chatting to a guy with a race stock car - a Ford Galaxy. I asked him about timing: He said the only way to tune it was advance until it pinked then back off a gnats.  That gave a timing of 45 deg advanced! He said that was because the combustion chamber was such an awful shape, it wasn't a hemi, and the plugs were right over one side.
Slough 59 GF/SR

Online Rex

  • Wise & Enlightened
  • *
  • Join Date: Apr 2017
  • Posts: 1680
  • Karma: 8
Re: Ignition timing in degrees
« Reply #17 on: 09.08. 2024 21:14 »
Add in the fact that it's very old machinery (Galaxy or A10) that has suffered God-knows-what mods from standard over the years, and that method is the best way rather than trusting to arbitrary figures (possibly) set decades ago.

Online RichardL

  • Outside Chicago, IL
  • Wise & Enlightened
  • *
  • Join Date: Nov 2007
  • Posts: 6464
  • Karma: 55
Re: Ignition timing in degrees
« Reply #18 on: 10.08. 2024 02:23 »
Orabanda’s Dynamometer testing is more recent than decades ago.

Richard L.

Online Rex

  • Wise & Enlightened
  • *
  • Join Date: Apr 2017
  • Posts: 1680
  • Karma: 8
Re: Ignition timing in degrees
« Reply #19 on: 10.08. 2024 09:10 »
Of course, but how many engines would he have tested to reach those figures? As previously said, all engines differ, so try and tune to the individual engine.

Offline orabanda

  • Wise & Enlightened
  • *
  • Join Date: Nov 2008
  • Posts: 1188
  • Karma: 25
Re: Ignition timing in degrees
« Reply #20 on: 10.08. 2024 10:42 »
Seven A10's were run on the dyno.
Also Yamaha two and four strokes; slight retardation (around 2 degrees) was the optimum setting for engine performance.

Cheers,
Richard

Online Sakura

  • A's Good Friend
  • ***
  • Join Date: Mar 2023
  • Posts: 96
  • Karma: 1
Re: Ignition timing in degrees
« Reply #21 on: 10.08. 2024 13:24 »
Well, there's no point in asking a question and then ignoring the answers. If I say so myself, I'm an extremely experienced fitter/mechanic but not an experienced tuner. I generally just follow the manual. I'm going to start with 33 degrees. It's manual adv/ret so I can monitor pinking easily. Thanks for all the input but don't stop if you've got something extra to add.
63 RGS

Offline berger

  • Wise & Enlightened
  • *
  • Join Date: Nov 2017
  • Posts: 3168
  • Karma: 20
  • keith.uk 500sscafe.norbsa JDM honda 750fz
Re: Ignition timing in degrees
« Reply #22 on: 10.08. 2024 15:25 »
why not just do what i did with my manual mag on a bit of a hot shooter, set it at 3/8ths full advance 36 degrees and there is plenty of retard to stop mine pinking if i force it labouring in gear, in fact there is enough to blue the exhausts.

Offline sean

  • Valued Contributor
  • ****
  • Join Date: Oct 2012
  • Posts: 373
  • Karma: 6
Re: Ignition timing in degrees
« Reply #23 on: 12.08. 2024 01:38 »
berger
same with my super rocket 3/8th ... which is basically the same as the RGS motor starts first kick 9 times out of 10 with a slight retard on the manual lever and crap 10% ethanol gas