« previous next »
Pages: [1]   Go Down

Author Topic: Fuel tap viton seal  (Read 629 times)

Offline greeneunos

  • Moving Up
  • **
  • Join Date: Aug 2022
  • Posts: 16
  • Karma: 0
Fuel tap viton seal
« on: 02.02. 2024 10:23 »
Hi guys , thanks for all the replies to my previous post , now has anyone sourced a viton seal for this type of tap ? BSA A7 1960 ( I know they are A65 taps )
Cheers Mike
Logged

Online MikPowl

  • A's Good Friend
  • ***
  • Join Date: Feb 2014
  • Posts: 65
  • Karma: 0
Re: Fuel tap viton seal
« Reply #1 on: 02.02. 2024 10:58 »
Try Googling 'Viton  O-rings' - loads of suppliers. You'll need to measure the bore diameter and thickness of the O-ring or groove that it sits in.
Logged

Online limeyrob

  • Wise & Enlightened
  • *
  • Join Date: Nov 2023
  • Posts: 1037
  • Karma: 4
Re: Fuel tap viton seal
« Reply #2 on: 02.02. 2024 16:50 »
Last time I needed one I got it off e-bay.  Good value and a decent range of sizes.  Its probably imperial but there's usually a metric that's close enough.  A lot of the metric are imperial (ie 3.3 etc) once you do the conversions.
I've used these guys in the past, reasonable and fast:
https://www.ebay.co.uk/str/sealsrus?_trksid=p4429486.m3561.l2563
Logged
Slough 59 GF/SR
Pages: [1]   Go Up
« previous next »