Using the comb (off topic, moved from tech board)

[Greybeard]

I do not get on with the comb.

My method for those pesky pushy rods: open all the adjusters fully. Hold the rocker arms up, (cups held down) with lacky bands. Wind the end of a length of soft gardening wire around each push rod. As you lower the box, manouvre the wires to get the rods in the cups. A bright torch helps. When the rods are all located pull the wires out then tighten down the box. As the adjusters are fully out, the pushrods can drop out of the cup, so cut the elastic bands and pull them out after you've set the valve gaps.

[berger]

GB i don't get on with a comb but black&tans work wonders 

[Worty]

GB i don't get on with a comb but black&tans work wonders 

'Ow about a razor mate

[groily]

GB i don't get on with a comb but black&tans work wonders 

I'm with bergs  . . . Razor worty? That's for 'down there' innit?

[berger]

worty my beardy bit has come off once a year around new year time since about 1979 then i shave for about a week or so then let it grow again, i am in the growing back phase

[Worty]

GB i don't get on with a comb but black&tans work wonders 

I'm with bergs  . . . Razor worty? That's for 'down there' innit?

Ya could be brothers mate.  Make sure they're safety razors 

[Worty]

worty my beardy bit has come off once a year around new year time since about 1979 then i shave for about a week or so then let it grow again, i am in the growing back phase

Me, you and Bill - the new ZZ Top