« previous next »
Pages: 1 [2]   Go Down

Author Topic: dynamo output problem  (Read 872 times)

Offline Swarfcut

  • Wise & Enlightened
  • *
  • Join Date: Oct 2018
  • Posts: 2379
  • Karma: 57
Re: dynamo output problem
« Reply #15 on: 09.06. 2022 10:36 »
 Simply scrape away a small section of the epoxy/varnish on the wire and check for continuity between the exposed wire and the  comm segment.  Then you can dig deeper as necessary.

 Swarfy.
Logged
Pages: 1 [2]   Go Up
« previous next »