Author Topic: Ignition timing Again! an Irish solution????  (Read 4041 times)

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5720
  • Karma: 66
Re: Ignition timing Again! an Irish solution????
« Reply #15 on: 10.08. 2009 14:40 »
Hi a10gf
Just wanted to check if the timing was out ( much ), as it is the points heel is half way between one ramp and the other at 11/32 btdc, so as our US friends say - a no brainer.

Thanks for your reply will get it retimed today

All the best - Bill
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco

Offline a10 gf

  • Global Moderator
  • Wise & Enlightened
  • **
  • Join Date: Sep 2006
  • Posts: 3230
  • Karma: 57
  • West Coast, Norway & Alpes Maritimes, France
    • A10 GF
Re: Ignition timing Again! an Irish solution????
« Reply #16 on: 19.08. 2009 13:48 »
Bill, came across this in "Modern" Motorcycle Maintenance (1953):

Auto advance retarded position: points just commence to separate with pistons at top to 1\16" past top.


Stand with
A10 GF '53 My A10 website
"Success only gets you a ticket to a much more difficult task"

Online bsa-bill

  • Wise & Enlightened
  • *
  • Join Date: Mar 2006
  • Posts: 5720
  • Karma: 66
Re: Ignition timing Again! an Irish solution????
« Reply #17 on: 19.08. 2009 15:24 »
Thanks for that - a useful bit of info to have at hand.
Retimed it and judging by the way it goes it must have been a bit out previous - goes like stink now

All the best - Bill
All the best - Bill
1961 Flash - stock, reliable, steady, fantastic for shopping
1959 Rocket Gold Flash - blinged and tarted up  would have seizure if taken to  Tesco