Author Topic: Side stand for '49 A7 Star Twin plunger  (Read 1314 times)

Offline pdg

  • A's Good Friend
  • ***
  • Join Date: Oct 2014
  • Posts: 90
  • Karma: 0
Side stand for '49 A7 Star Twin plunger
« on: 15.10. 2018 15:25 »
Hi,
I'd like to fit a side stand to my '49 A7 Star Twin plunger, without the need for welding. Does anyone know if a clamp or bolt on side stand fits? I've tried a universal stand but can't get the lug between the engine and the frame. Are there other options using the footrest lug, or the centre stand lugs, or the rear of the frame?
Many thanks, Peter.

Offline Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9972
  • Karma: 50
Re: Side stand for '49 A7 Star Twin plunger
« Reply #1 on: 15.10. 2018 16:38 »
I've seen pictures of American kick-stands that bolt onto the frame tube in front of the engine.
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Offline chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 4114
  • Karma: 54
Re: Side stand for '49 A7 Star Twin plunger
« Reply #2 on: 24.10. 2018 20:48 »
Hi pdg,
The "usual" place for attaching a clamp on stand on plunger frames is to the frame tube between the primary case and bottom of the plunger unit 
This is where BSA fitted them on certain models

John
1961 Super Rocket
1963 RGS (ongoing)

Offline Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9972
  • Karma: 50
Re: Side stand for '49 A7 Star Twin plunger
« Reply #3 on: 25.10. 2018 13:38 »
My Plunger has the prop-stand mounting attached to the frame, factory fitted I'm sure. I found a picture of the same arrangement on the forum, posted in 2008 by GuyboA10
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Offline Johnhayesuk

  • John
  • Active
  • *
  • Join Date: Aug 2018
  • Posts: 5
  • Karma: 0
  • BSA star twin 500
Re: Side stand for '49 A7 Star Twin plunger
« Reply #4 on: 22.08. 2019 07:15 »
Hi I have a 1952 plunger frame and have a bolt on side stand I’m sure they must be the same jr

Offline Rex

  • Wise & Enlightened
  • *
  • Join Date: Apr 2017
  • Posts: 1698
  • Karma: 8
Re: Side stand for '49 A7 Star Twin plunger
« Reply #5 on: 22.08. 2019 09:03 »
I'm still looking for a suitable side stand for my '51 too. It would be easy if it had the factory lug but it hasn't, and by the looks of it never did have. Using the centre stand is a pain (literally) in the backside.

Offline Rookie_V#60

  • Rudolph the rednose rendeer
  • A's Good Friend
  • ***
  • Join Date: Jun 2012
  • Posts: 94
  • Karma: 5
  • Je oller je doller
1923 James Model 12 500ccm v-twin
1926 Douglas EW 350ccm flat-twin
1936 Motosacoche 500ccm single
1948 BSA A7 Longstroke 500ccm parallel-twin
1955 Ariel Square Four MKII
1960 C1, 1967 C2, 1979 C3-gone!

Offline Topdad

  • bob hebdon
  • Wise & Enlightened
  • *
  • Join Date: May 2011
  • Posts: 2650
  • Karma: 36
  • l
Re: Side stand for '49 A7 Star Twin plunger
« Reply #7 on: 27.08. 2019 16:12 »
i've just got the numbers from Draganflys site  listing the part numbers for factory fitted side stands .They included rigid plunger and of course s/w models from M20/21 B series and of corse A 's . so they were factory fitted if ordered.
" rules are made for the guidance of wise men and the blind obediance of fools"
United Kingdom