First "big" ride out on the "loan" A10 I have, getting it up together for a neighbour.
Run to Kidderminster Motorcycles to get some bits, good times!
On return journey after snack stop at Ironbridge, suffered a couple of stalls at junctions on tick-over, then started missing like a pig.
It was only at third stop that I put me foot on the rear brake, and noted lamp supplying only a faint red glow!
So, must be charging issue, and a looping combination of push, start ride like an idiot, stop, psh etc.etc. I finally made it home!
So, battery on charge for 24 hours (12v, brand new Lucas battery) Just added the new bits from Kidde and thought better check charging voltage.
No drain, ignition off, battery at 12.4v across the terminals.
Engine running meter varies from 11.9 to 12.1v, issue verified, it ran till the battery gave up for sparks!
Bike setup, 12v, +ve earth, Boyer Bransden Mk3 ignition (nowt to do with charging but for info!) and Boyer Bransden "Power Box" regulator.
Can anyone out there remind me, step by step, how to locate lack of charging? Long time since I've played with DC charging.
Is it just the Power Box (they any good?) regulator stuffed or dynamo not giving enough out?
If it's not about 14V at the battery when running I'm stuffed!
Any help appreciated!