ordering new amal 376

[coater87]

 Guys,

 I remember some discussion on making sure to really clean these well before use.

 But I also remember someone mentioning they run either rich or lean right from the factory, I just cannot remember which.

I want to make sure I have enough of and the right parts to bring this in. Right now I have everything to go much richer, if I need to be able to go much leaner I will add it to the order. Otherwise I will save a little money here.

 Thank you,
Lee

[KiwiGF]

Guys,

 I remember some discussion on making sure to really clean these well before use.

 But I also remember someone mentioning they run either rich or lean right from the factory, I just cannot remember which.

I want to make sure I have enough of and the right parts to bring this in. Right now I have everything to go much richer, if I need to be able to go much leaner I will add it to the order. Otherwise I will save a little money here.

 Thank you,
Lee

My 376 worked well “out of the box” on an 1956 A10 with a 356 cam, otherwise std, I did not know to clean it first!

Burden state what jets it comes with, which should be the same as standard?

[coater87]

Guys,

 I remember some discussion on making sure to really clean these well before use.

 But I also remember someone mentioning they run either rich or lean right from the factory, I just cannot remember which.

I want to make sure I have enough of and the right parts to bring this in. Right now I have everything to go much richer, if I need to be able to go much leaner I will add it to the order. Otherwise I will save a little money here.

 Thank you,
Lee

My 376 worked well “out of the box” on an 1956 A10 with a 356 cam, otherwise std, I did not know to clean it first!

Burden state what jets it comes with, which should be the same as standard?

 Yes, same as standard except a 106 needle, which I think was originally a 106.5


 I just remember someone saying they are slightly leaner or richer than original- and I just cannot remember which way.

 I for sure have the jets to fatten it up, but nothing to lean it out.

 Lee

[coater87]

 New carb arrived today.

 Took it apart, cleaned some lite machine oil looking stuff out, didnt see any dirt or puke.

 Checked jet sizes, set pilot to 1.5 and now I have to wait for some time off and a warmish day.

 Everything is set up like stock, and I will start from there.

 They had a dusting of snow last week about 40 miles North of me. Today its 70 degrees F. but I am running out of time this year.

 Lee