Wiring by neck

[coater87]

I am hanging the harness onto the bike.

 Everything is working out well except by the neck (the hardest part it seems).

 I'm not sure if BSA ran the harness behind the braces like in the picture, or on the outside. I'm too tight on the outside, but I am not liking all the rub points on the inside either.

 Where does the harness belong in this area?

It might be hard to decipher, but picture is of the neck and wiring harness. My phone still only takes "selfie" pictures.

 Thank you,
Lee

[morris]

Got mine running on the outside. No issues

[coater87]

 Thank you Morris,

 Maybe because of the shape of the neck braces (and the fact my harness seems a little short here and there) I have talked myself into running it inside the braces.

 With the sweep at the top on both sides, it looks like they were put there for the purpose.

 I am just going to have to modify the harness to work on the outside, I think it will be much easier to wire in too.

 Thanks again,
Lee