« previous next »
Pages: [1]   Go Down

Author Topic: Nut / Spanner size  (Read 618 times)

Offline RoyC

  • Wise & Enlightened
  • *
  • Join Date: Mar 2017
  • Posts: 1179
  • Karma: 10
Nut / Spanner size
« on: 04.12. 2017 09:02 »
Does anyone know what size nuts / spanner these are ?
I want to get a ratchet spanner to do the job of getting them back on.

Long sliding plate bolts.
Logged
My bike is a 1958 A7SS
Staffordshire UK

Online JulianS

  • 1962 A10
  • Wise & Enlightened
  • *
  • Join Date: Mar 2017
  • Posts: 1455
  • Karma: 29
Re: Nut / Spanner size
« Reply #1 on: 04.12. 2017 09:28 »
On the original - large hex takes 5/16w or 3/8BS. Nut takes 3/16w or 1/4BS.

With pattern parts could be metric heads you will need to try a 16 mm on the large head.
Logged

Offline RoyC

  • Wise & Enlightened
  • *
  • Join Date: Mar 2017
  • Posts: 1179
  • Karma: 10
Re: Nut / Spanner size
« Reply #2 on: 04.12. 2017 09:36 »
Thanks for that Julian.

Roy.
Logged
My bike is a 1958 A7SS
Staffordshire UK

Online groily

  • Wise & Enlightened
  • *
  • Join Date: Jul 2007
  • Posts: 1956
  • Karma: 33
    • www.brightsparkmagnetos.com
Re: Nut / Spanner size
« Reply #3 on: 09.12. 2017 09:02 »
The table in the link here can be a bit handy sometimes (as long as you've got a slide gauge to measure across the flats)
https://www.sat.dundee.ac.uk/psc/spanner_jaw.html
Logged
Bill
Pages: [1]   Go Up
« previous next »