« previous next »
Pages: [1]   Go Down

Author Topic: gearbox mainshaft end float.  (Read 700 times)

Offline goldstar1955

  • New
  • Join Date: May 2017
  • Posts: 1
  • Karma: 0
gearbox mainshaft end float.
« on: 18.06. 2017 17:44 »
1949 plunger a/7 gearbox end float seems excessive . Comments please
Logged

Offline chaterlea25

  • Wise & Enlightened
  • *
  • Join Date: Jun 2009
  • Posts: 4130
  • Karma: 54
Re: gearbox mainshaft end float.
« Reply #1 on: 18.06. 2017 20:40 »
Hi
Welcome to the forum *smile*
There should be zero endfloat on the gearbox mainshaft
The shaft is locked in position by the bearing, kickstart ratchet bush and nut on the righthand end
Endfloat could be a loose nut or a bad bush or bearing
You can see whats going on by looking through the oval inspection cover by the kickstart

John
Logged
1961 Super Rocket
1963 RGS (ongoing)

Offline Greybeard

  • Jack of all trades; master of none.
  • Wise & Enlightened
  • *
  • Join Date: Feb 2011
  • Posts: 9982
  • Karma: 50
Re: gearbox mainshaft end float.
« Reply #2 on: 18.06. 2017 20:45 »
 *welcome*
Logged
Greybeard (Neil)
2023 Gold Star
Supporter of THE DISTINGUISHED GENTLEMAN'S RIDE https://www.gentlemansride.com

Warwickshire UK


A Distinguished Gentleman Riding his 1955 Plunger Golden Flash

Offline Topdad

  • bob hebdon
  • Wise & Enlightened
  • *
  • Join Date: May 2011
  • Posts: 2655
  • Karma: 36
  • l
Re: gearbox mainshaft end float.
« Reply #3 on: 19.06. 2017 10:58 »
Goldie, as GB says welcome to the forum ,there are many knowledgeable and friendly people here always ready to help.We're also quite nosey so how about a little info about yourself and your bike ,cheers Bob
Logged
" rules are made for the guidance of wise men and the blind obediance of fools"
United Kingdom

Offline BSA_54A10

  • Wise & Enlightened
  • *
  • Join Date: May 2008
  • Posts: 2544
  • Karma: 37
    • BSA National
Re: gearbox mainshaft end float.
« Reply #4 on: 20.06. 2017 12:06 »
With a lot of older bikes the lip that retains the left side bearing gives way due to relentless pounding with big hammers to remove the clutch.
Found that out the heard way, then went through 3 or 4 cases to find a good one.
Logged
Bike Beesa
Trevor
Pages: [1]   Go Up
« previous next »