Before I start buying parts, I thought I would ask for ideas and suggestions about an intermittent gearbox problem that I have. Most of the time it works fine, but occasionally when changing up from 1st to 2nd , 2nd does not engage. If I go back down to 1st and reselect 2nd it engages as it should, just occasionally this will happen a couple of times in succession, but mostly it once I have changed back to 1st and then reselected 2nd the problem does not reoccur. This is entirely a random and unpredictable event. I suspect maybe the selector plate “Claw” is worn or perhaps the timing is maybe slightly out. 3rd and 4th are not affected, and changing down from 2nd to 1st seems to be unaffected. Selecting neutral is not a problem either. Can anyone suggest what might be going on here?