rigid a7 oil tank

[62a10]

i have a rigid frame a7/a10 oil tank im trying to plumb for a triumph 650. can any one show me a pic of the oil fitting that goes into the return side of this oil tank. its the fitting that goes into the nut at the lower right side of this tank. there is also a tee off the line that oils the rocker shafts:

[orabanda]

Regards,
Richard

[62a10]

thank you richard. is that part for sale? i can only find the banjo tee
 to the top end. does this tee belong to the fitting you pictured?

[Josh Cox]

I believe it is a 65-8420, GBP 3.89 at Draganfly: http://www.draganfly.co.uk/shop/pd-414095871.htm?defaultVariants={EOL}&categoryId=0

[LJ.]

Is this Pic any help?

[62a10]

thank you lj. yes it helps. it tells me i am mixing up some things,
here is what i have. i just paid 32.00 us for the top end tee, and i think its wrong

[LJ.]

Glad it is of some use... Let me know if you require any extra photos at different angles! If it was a leaking joint I would have taken it apart and given you an exploded view, but sadly (or not so) it is dry and sealed.