The BSA A7-A10 Forum

Bikes, Pictures, Stories & more => Wanted & For Sale => Topic started by: Rex on 26.03. 2024 09:14

Title: Wanted Crinkle rear hub.
Post by: Rex on 26.03. 2024 09:14

As the title says, I need a '51 plunger Crinkle rear hub if anyone has one for sale.
Thanks

Title: Re: Wanted Crinkle rear hub.
Post by: berger on 26.03. 2024 18:59

do these hubs have threads each end ? if so i have one

Title: Re: Wanted Crinkle rear hub.
Post by: Rex on 26.03. 2024 22:28

Pretty sure they do. It's the earlier type I need, the later Starfire etc type have the threaded ring for the speedo drive I believe.
Can you PM me a price please Bergs?

Title: Re: Wanted Crinkle rear hub.
Post by: Swarfcut on 27.03. 2024 08:50

 Correct there Rex. But at a push any crinkle rear hub can be adapted to fit. The drive splines are the same, as is the bore for the wheel bearing OD. Different wheel bearings and centre spacers are used on the various model ranges.

 As for needing two bearing locking rings, the S/A version gets by with just one,  the through spindle  design being very similar to the Plunger set up. Progress or cost cutting....?

 Swarfy.

Title: Re: Wanted Crinkle rear hub.
Post by: berger on 27.03. 2024 12:52

Rex some pics , is this the one? slight damage to the start of a thread

Title: Re: Wanted Crinkle rear hub.
Post by: Rex on 27.03. 2024 17:48

Looks like the one. Do you have the bearing retainers? I thinks Drags have had 'em on back order for about three years now. PM the price you want for it please.